#****************************************************************************
#
# Copyright (c) 2001, 2002, 2003, 2004 Broadcom Corporation
# All Rights Reserved
# No portions of this material may be reproduced in any form without the
# written permission of:
# Broadcom Corporation
# 16251 Laguna Canyon Road
# Irvine, California 92618
# All information contained in this document is Broadcom Corporation
# company private, proprietary, and trade secret.
#
#****************************************************************************
# Top-level Makefile for all commengine xDSL platforms
include version.make
BRCM_RELEASETAG=$(BRCM_VERSION).$(BRCM_RELEASE)L.$(BRCM_EXTRAVERSION)
###########################################
#
# Sercomm add
#
###########################################
# v4 PROFILE=96348W3
# N2K PROFILE=96348W3-N2K
# NUv2 PROFILE=96358GW-MIMO
include PROFILE.make
export PROFILE
include sc.mak
ifeq ($(WL),)
#WL=MIMO
endif
###########################################
#
# Define Basic Variables
#
###########################################
BUILD_DIR = $(shell pwd)
BL_BUILD_DIR=$(BUILD_DIR)/cfe/build/broadcom/bcm63xx_rom
KERNEL_VER = 2.6
ifeq ($(strip $(KERNEL_VER)),2.6)
INC_KERNEL_BASE = $(BUILD_DIR)/kernel
ORIGINAL_KERNEL = linuxmips.tar.bz2
endif
KERNEL_DIR = $(INC_KERNEL_BASE)/linux
BRCMDRIVERS_DIR = $(BUILD_DIR)/bcmdrivers
USERAPPS_DIR = $(BUILD_DIR)/userapps
LINUXDIR = $(INC_KERNEL_BASE)/linux
HOSTTOOLS_DIR = $(BUILD_DIR)/hostTools
IMAGES_DIR = $(BUILD_DIR)/images
TARGETS_DIR = $(BUILD_DIR)/targets
DEFAULTCFG_DIR = $(TARGETS_DIR)/defaultcfg
XCHANGE_DIR = $(BUILD_DIR)/xChange
FSSRC_DIR = $(TARGETS_DIR)/fs.src
CFE_FILE = $(TARGETS_DIR)/cfe/cfe$(BRCM_CHIP).bin
SHARED_DIR = $(BUILD_DIR)/shared
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
GENDEFCONFIG_CMD = $(HOSTTOOLS_DIR)/scripts/gendefconfig
RUN_NOISE=0
6510_REF_CODE=$(BUILD_DIR)/userapps/broadcom/6510refCode
###########################################
#
# Import Build Profiles
#
###########################################
BRCM_BOARD=bcm963xx
LAST_PROFILE=$(shell find targets -name vmlinux | sed -e "s?targets/??" -e "s?/.*??" -e "q")
ifeq ($(strip $(PROFILE)),)
PROFILE=$(LAST_PROFILE)
export PROFILE
endif
ifneq ($(strip $(PROFILE)),)
include $(TARGETS_DIR)/$(PROFILE)/$(PROFILE)
export BRCM_CHIP
export BRCM_FLASHPSI_SIZE
export BRCM_DRIVER_WIRELESS_PCMCIA_DATASWAP BRCM_DRIVER_WIRELESS_EBI_DMA
export BRCM_DRIVER_USB BRCM_DRIVER_ETHERNET_CONFIG
export BRCM_DEFAULTCFG
export BRCM_CERT_FILE
export BRCM_KERNEL_NF_FIREWALL BRCM_KERNEL_NF_MANGLE BRCM_KERNEL_NF_NAT
export BRCM_KERNEL_NF_NAT_ALG_FTP BRCM_KERNEL_NF_NAT_ALG_SIP BRCM_KERNEL_NF_NAT_ALG_TFTP BRCM_KERNEL_NF_NAT_ALG_H323 BRCM_KERNEL_NF_NAT_ALG_H323_SIGNAL_PROXY
export BRCM_KERNEL_NF_NAT_ALG_IRC BRCM_KERNEL_NF_NAT_ALG_WM BRCM_KERNEL_NF_NAT_ALG_PT BRCM_KERNEL_NF_NAT_ALG_PPTP BRCM_KERNEL_NF_NAT_ALG_IPSEC
export BRCM_KERNEL_NF_NAT_ALG_RTSP BRCM_KERNEL_NF_NAT_ALG_SNMP BRCM_KERNEL_NF_NAT_ALG_TALK
endif
###########################################
#
# Define Toolchain
#
###########################################
ifeq ($(strip $(BRCM_UCLIBC)),y)
NTC=1
ifeq ($(strip $(NTC)),1)
ifndef TOOLCHAIN
TOOLCHAIN=/opt/toolchains/uclibc-crosstools_gcc-3.4.2_uclibc-20050502
endif
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-linux-uclibc-
else
TOOLCHAIN=/opt/toolchains/uclibc
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-uclibc-
endif
else
TOOLCHAIN=/usr/crossdev/mips
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-linux-
endif
AR = $(CROSS_COMPILE)ar
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
CXX = $(CROSS_COMPILE)g++
CPP = $(CROSS_COMPILE)cpp
NM = $(CROSS_COMPILE)nm
STRIP = $(CROSS_COMPILE)strip
SSTRIP = $(CROSS_COMPILE)sstrip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
RANLIB = $(CROSS_COMPILE)ranlib
LIB_PATH = $(TOOLCHAIN)/mips-linux/lib
ifndef LIBDIR
LIBDIR = $(TOOLCHAIN)/mips-linux/lib
endif
LIBCDIR = $(TOOLCHAIN)/mips-linux
###########################################
#
# Application-specific settings
#
###########################################
TARGET_FS = $(TARGETS_DIR)/$(PROFILE)/fs
PROFILE_DIR = $(TARGETS_DIR)/$(PROFILE)
INSTALL_DIR=$(PROFILE_DIR)/fs.install
PROFILE_PATH = $(TARGETS_DIR)/$(PROFILE)/$(PROFILE)
VENDOR_NAME = bcm
FS_KERNEL_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_fs_kernel
CFE_FS_KERNEL_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_cfe_fs_kernel
FLASH_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_flash_image_$(BRCM_BOARD_ID)
INC_BRCMDRIVER_PUB_PATH=$(BRCMDRIVERS_DIR)/opensource/include
INC_BRCMDRIVER_PRIV_PATH=$(BRCMDRIVERS_DIR)/broadcom/include
INC_ENDPOINT_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/endpoint/bcm9$(BRCM_CHIP)/inc
INC_ADSLDRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/adsl/impl1
INC_ATMAPI_DRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/atmapi/impl1
INC_ATMBONDING_DRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/atmbonding/impl1/common
INC_ATMBONDING_ETH_DRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/atmbondingeth/impl1
BROADCOM_CFM_DIR=$(BROADCOM_DIR)/cfm
INC_BRCMCFM_PATH=$(BROADCOM_CFM_DIR)/inc
INC_BRCMSHARED_PUB_PATH=$(SHARED_DIR)/opensource/include
INC_BRCMSHARED_PRIV_PATH=$(SHARED_DIR)/broadcom/include
INC_BRCMBOARDPARMS_PATH=$(SHARED_DIR)/opensource/boardparms
INC_FLASH_PATH=$(SHARED_DIR)/opensource/flash
KERNEL_DEBUG=0
ifeq ($(strip $(BRCM_KERNEL_DEBUG)),y)
KERNEL_DEBUG=1
endif
ifeq ($(strip $(BRCM_KERNEL_OPROFILE)),y)
export CONFIG_DEBUG_INFO=1
export CONFIG_FRAME_POINTER=1
endif
ifeq ($(strip $(BRCM_APP_PHONE)),sip)
export VOXXXLOAD=1
export VOIPLOAD=1
export SIPLOAD=1
ifeq ($(strip $(BRCM_VODSL_CONFIG_MANAGER)),y)
export BRCM_VODSL_CFGMGR=1
endif
BRCM_RELEASETAG := $(BRCM_RELEASETAG).sip
endif
ifeq ($(strip $(BRCM_APP_PHONE)),mgcp)
export VOXXXLOAD=1
export VOIPLOAD=1
export MGCPLOAD=1
export BRCM_VODSL_CFGMGR=0
BRCM_RELEASETAG := $(BRCM_RELEASETAG).mgcp
endif
ifeq ($(strip $(BRCM_PROFILER_ENABLED)),y)
export BRCM_PROFILER_TOOL=1
else
export BRCM_PROFILER_TOOL=0
endif
ifneq ($(strip $(BUILD_VODSL)),)
export VOXXXLOAD=1
endif
ifeq ($(strip $(BRCM_VODSL_STUNC)),y)
export BRCM_VODSL_STUN_CLIENT=1
endif
ifeq ($(strip $(BRCM_VODSL_RANDOMP)),y)
export BRCM_VODSL_RANDOM_PORT=1
endif
ifeq ($(strip $(BRCM_VODSL_VOICE_ANNOUNCEMENT)),y)
export BRCM_VODSL_VOICE_ANNOUNCEMENT=1
endif
ifeq ($(strip $(BRCM_VODSL_PSTN_LIFE_LINE_SUPPORT)),y)
export BRCM_VODSL_PSTN_LIFE_LINE_SUPPORT=1
BRCM_VOICE_GLOBAL_CFLAGS = PSTN_LIFE_LINE_SUPPORT=1
endif
ifeq ($(strip $(BRCM_VODSL_MULTIPLE_SIP_ACCOUNTS)),y)
export BRCM_VODSL_MULTI_SIP_ACCNT=1
endif
ifeq ($(strip $(BRCM_VODSL_CALL_FEATURE_PERSIST_STORE_SUPPORT)),y)
export BRCM_VODSL_CALL_FEATURE_PERSIST_STORE_SUPPORT=1
endif
BRCM_DSP_HAL := gw
BRCM_DSP_HAL_EXTENSION :=
XCHANGE_DSP_APP_EXTENSION :=
export XCHANGE_DSP_APP=$(BRCM_DSP_CODEC)
ifeq ($(strip $(BRCM_DSP_PCM)),y)
XCHANGE_DSP_APP := dspApp3341_tdm
BRCM_DSP_HAL_EXTENSION := _pcm
endif
ifeq ($(strip $(BRCM_DSP_PCM_G726)),y)
XCHANGE_DSP_APP := dspApp3341_tdm_g726
BRCM_DSP_HAL_EXTENSION := _pcm
endif
ifeq ($(strip $(BRCM_DSP_PCM_T38_EXT)),y)
XCHANGE_DSP_APP := dspApp3341_tdm_t38
BRCM_DSP_HAL_EXTENSION := _pcm
endif
ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)),y)
XCHANGE_DSP_APP := dspApp3341
BRCM_DSP_HAL_EXTENSION := _hybrid
XCHANGE_DSP_APP_EXTENSION := _fxo_ext
endif
BCM_VDSL_TYPE_DEFINES := -DDVDSL_CO_TYPE
ifeq ($(strip $(BUILD_VDSL)),y)
export BUILD_VDSL=y
VBOOT_BIN="boot.bin"
ifneq ($(strip $(CPE_ANNEX_B)),)
CPE_MODEM="cpe_annex_b.bin"
else
CPE_MODEM="cpe_annex_a.bin"
endif
ifeq ($(strip $(VCOPE_TYPE)),CO)
VMODEM_BIN="co_modem.bin"
BCM_VDSL_TYPE_DEFINES := -DVDSL_CO_TYPE=1
endif
ifeq ($(strip $(VCOPE_TYPE)),CPE)
VMODEM_BIN=$(CPE_MODEM)
endif
endif
export ${BCM_VDSL_TYPE_DEFINES}
#
# Warning here, we do re-assign some of the variables defined earlier:
# BRCM_DSP_HAL and BRCM_DSP_HAL_EXTENSION for example, in order to pickup
# the correct board HAL application.
#
ifeq ($(strip $(BRCM_DSP_FXO)),y)
ifeq ($(strip $(BRCM_SLIC_LE9502)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)_Le9502FXO
BRCM_RELEASETAG := $(BRCM_RELEASETAG)._LE9502
BRCM_DSP_HAL := _Le9502FXO
BRCM_DSP_HAL_EXTENSION :=
export BRCM_SLIC_LE9502
else
ifeq ($(strip $(BRCM_SLIC_LE9500)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)_Le9500FXO
BRCM_RELEASETAG := $(BRCM_RELEASETAG)._LE9500
BRCM_DSP_HAL := _Le9500FXO
BRCM_DSP_HAL_EXTENSION :=
export BRCM_SLIC_LE9500
endif
endif
endif
BRCM_DRIVER_ATM_BONDING_DEFINES := -DDBCM_ATM_BONDING -DDBCM_ATM_BONDING_ETH -DDATM_BONDING_TEST
ifeq ($(strip $(BRCM_CHIP)),6358)
ifeq ($(strip $(BRCM_DRIVER_ATM_BONDING)),m)
BRCM_DRIVER_ATM_BONDING_DEFINES := -DBCM_ATM_BONDING=1
#expandAtmbSrc:
# @cd $(INC_ATMBONDING_DRV_PATH); \
# if [ ! -e boot6358Vector.obj ]; then \
# echo Untarring AtmBonding xdrv source...; \
# tar xvfz atmb_xdrivers.tgz 2> /dev/null; \
# fi
else
#expandAtmbSrc:
endif
else
#expandAtmbSrc:
endif
ifeq ($(strip $(BRCM_CHIP)),6358)
ifeq ($(strip $(BRCM_DRIVER_ATM_BONDING_ETH)),m)
BRCM_DRIVER_ATM_BONDING_DEFINES := -DBCM_ATM_BONDING_ETH=1
endif
endif
export ${BRCM_DRIVER_ATM_BONDING_DEFINES}
#
# DSP codec flags definition. To be used throughout the application (for configuration and vodsl)
#
BRCM_DSP_CODEC_DEFINES := -DXCFG_G711_SUPPORT=1
ifeq ($(strip $(BRCM_DSP_CODEC_G723)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_CODEC_G726)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_CODEC_G729)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_CODEC_G7xx)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_PCM)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_PCM_G726)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_PCM_T38_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_CODEC_T38_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif
ifeq ($(strip $(BRCM_DSP_CODEC)),all)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV16_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_ILBC_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_GSMAMR_SUPPORT=1
endif
#
# Definition of the number of voice channels supported based on the specific
# application being created.
#
ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=0 -DNUM_FXO_CHANNELS=1
else
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=0 -DNUM_TDM_VOICE_CHANNELS=0 -DNUM_FXO_CHANNELS=0
endif
export BRCM_DSP_CODEC_DEFINES
export BRCM_DSP_CHAN_DEFINES
export BRCM_DSP_FXO
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)$(BRCM_DSP_HAL)$(BRCM_DSP_HAL_EXTENSION)
export XCHANGE_DSP_APP_EXTENSION
export BRCM_DSP_HAL_EXTENSION
# If no codec is selected, build G.711 load.
# Any XCHANGE_BUILD_APP directory would be OK
# because G.711 is included with all the voice DSP images.
ifneq ($(strip $(BUILD_VODSL)),)
ifeq ($(strip $(XCHANGE_DSP_APP)),)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)gw
export XCHANGE_DSP_APP=g711
endif
endif
BRCM_RELEASETAG := $(BRCM_RELEASETAG).$(XCHANGE_DSP_APP)
ifeq ($(strip $(BRCM_CHIP)),6368)
ifeq ($(strip $(BRCM_6368_G729_FXO)),y)
BRCM_DSP_HAL := vw_fxo
BRCM_DSP_CHAN_DEFINES = -DNUM_FXO_CHANNELS=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_GSMAMR_SUPPORT=1
export BRCM_6368_G729_FXO
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_fxo
export BRCM_DSP_CODEC_DEFINES
endif
endif
ifeq ($(strip $(BRCM_CHIP)),6358)
ifeq ($(strip $(BRCM_6358_G729_FXO)),y)
BRCM_DSP_HAL := vw_fxo
BRCM_DSP_CHAN_DEFINES = -DNUM_FXO_CHANNELS=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_GSMAMR_SUPPORT=1
export BRCM_6358_G729_FXO
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_fxo
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_G729_4FXS)),y)
BRCM_DSP_HAL := vw_4fxs
export BRCM_6358_G729_4FXS
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_4fxs
else
ifeq ($(strip $(BRCM_6358_G729_2FXS_LEGERITY)),y)
BRCM_DSP_HAL := vw_legerity
export BRCM_6358_G729_2FXS_LEGERITY
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_legerity
else
ifeq ($(strip $(BRCM_6358_G729_FXO_LEGERITY)),y)
BRCM_DSP_HAL := vw_fxo_legerity
BRCM_DSP_CHAN_DEFINES = -DNUM_FXO_CHANNELS=1
export BRCM_6358_G729_FXO_LEGERITY
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_fxo_legerity
else
ifeq ($(strip $(BRCM_6358_G729_ISDN_FXO)),y)
BRCM_DSP_HAL := vw_isdn_fxo
BRCM_DSP_CHAN_DEFINES = -DNUM_FXO_CHANNELS=1
BRCM_DSP_CODEC_DEFINES := -DXCFG_G711_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
export BRCM_6358_G729_ISDN_FXO
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_isdn_fxo
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_G729_ISDN_FXO_LE88311)),y)
BRCM_DSP_HAL := vw_isdn_1fxs_fxo
BRCM_DSP_CHAN_DEFINES = -DNUM_FXO_CHANNELS=1
BRCM_DSP_CODEC_DEFINES := -DXCFG_G711_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
export BRCM_6358_G729_ISDN_FXO_LE88311
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_isdn_1fxs_fxo
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_G729_DECT)),y)
BRCM_DSP_HAL := vw_dect
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G711_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV16_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_ILBC_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
export BRCM_6358_G729_DECT
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_dect
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_G729_1FXS)),y)
BRCM_DSP_HAL := vw_1fxs
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G711_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV16_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_ILBC_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
export BRCM_6358_G729_1FXS
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_1fxs
else
ifeq ($(strip $(BRCM_6358_G729_WB_DECT)),y)
BRCM_DSP_HAL := vw_wb_dect
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV16_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV32_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_LPCMWB_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G722_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_ILBC_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_AMRWB_SUPPORT=1
export BRCM_6358_G729_WB_DECT
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_wb_dect
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_WIDEBAND)),y)
BRCM_DSP_HAL := vw_wb
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV16_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_BV32_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_LPCMWB_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G722_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_ILBC_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_AMRWB_SUPPORT=1
export BRCM_6358_WIDEBAND
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_wb
export BRCM_DSP_CODEC_DEFINES
else
ifeq ($(strip $(BRCM_6358_2FXS_DECT_PONG)),y)
BRCM_DSP_HAL := vw_pong
export BRCM_6358_2FXS_DECT_PONG
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw_pong
else
BRCM_DSP_HAL := vw
export BRCM_6358_G729
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)vw
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
ifeq ($(strip $(BRCM_VODSL_DUAL_3341)),y)
BRCM_RELEASETAG := $(BRCM_RELEASETAG).dual3341
endif
#Set up ADSL standard
export ADSL=$(BRCM_ADSL_STANDARD)
#Set up ADSL_PHY_MODE {file | obj}
export ADSL_PHY_MODE=file
#Set up ADSL_SELF_TEST
export ADSL_SELF_TEST=$(BRCM_ADSL_SELF_TEST)
#Set up ADSL_PLN_TEST
export ADSL_PLN_TEST=$(BUILD_TR69_XBRCM)
#WL command
ifneq ($(strip $(WL)),)
build_nop:=$(shell if [ -e $(USERAPPS_DIR)/broadcom/cfm ] ; then cd $(USERAPPS_DIR)/broadcom/cfm; make clean; cd $(BUILD_DIR) ; fi)
ifeq ("$(WL)", "MIMO")
BUILD_WL_MIMO=y
else
BUILD_WL_MIMO=
endif
#build_nop:=$(shell cd $(USERAPPS_DIR)/broadcom/cfm; make clean; cd $(BUILD_DIR))
export WL
endif
export BUILD_WL_MIMO
export BUILD_WL_DEFAULT
export BUILD_WL_IMPL3
ifeq ($(strip $(BRCM_IKOS)),y)
BUSYBOX_CONFIG=ikos.config
FS_COMPRESSION=-noD
else
BUSYBOX_CONFIG=brcm.config
FS_COMPRESSION=-lzma
endif
#MGMT command
ifneq ($(strip $(MGMT)),)
export BUILD_SNMP=dynamic
export BUILD_TR69c=
export BUILD_TR69C_SSL=
export BUILD_TR69C_BCM_SSL=
BUILD_SNMP_SET=y
ifeq ("$(MGMT)", "NETSNMP")
export NET_SNMP=y
export BRCM_SNMP=
export BUILD_TR69c=
BUILD_SNMP_ADSL_MIB=y
BUILD_SNMP_AT_MIB=y
BUILD_SNMP_ATM_MIB=y
BUILD_SNMP_ICMP_MIB=y
BUILD_SNMP_IP_MIB=y
BUILD_SNMP_SNMP_MIB=y
BUILD_SNMP_SYSOR_MIB=y
BUILD_SNMP_TCP_MIB=y
BUILD_SNMP_UDP_MIB=y
else
ifeq ("$(MGMT)", "BRCMSNMP")
export NET_SNMP=
export BRCM_SNMP=y
BUILD_SNMP_AUTO=y
BUILD_SNMP_CHINA_TELECOM_CPE_MIB=y
BUILD_SNMP_BRCM_CPE_MIB=y
BUILD_SNMP_UDP=y
BUILD_SNMP_EOC=y
BUILD_SNMP_AAL5=y
BUILD_SNMP_AUTO=y
BUILD_SNMP_DEBUG=
endif
#endif of ifneq ($(strip $(MGMT)),)
endif
#end of MGMT
endif
#############################################
#
# Locale Selection
#
#############################################
ifeq ($(strip $(BRCM_VRG_COUNTRY_STATIC_PROFILE)),n)
# User-selected Configuration
LOCALEFLAGS = -DBRCM_VRG_COUNTRY_CFG_NON_STATIC_PROFILE=1
LOCALEFLAGS_TYPE2 = $(addprefix -D , BRCM_VRG_COUNTRY_CFG_NON_STATIC_PROFILE=1)
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_NORTH_AMERICA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_NORTH_AMERICA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_NORTH_AMERICA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_AUSTRALIA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_AUSTRALIA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_AUSTRALIA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_AUSTRIA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_AUSTRIA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_AUSTRIA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_BELGIUM)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_BELGIUM=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_BELGIUM=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_BRAZIL)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_BRAZIL=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_BRAZIL=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_CHILE)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_CHILE=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_CHILE=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_CHINA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_CHINA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_CHINA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_CZECH)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_CZECH=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_CZECH=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_DENMARK)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_DENMARK=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_DENMARK=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_ETSI)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_ETSI=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_ETSI=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_FINLAND)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_FINLAND=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_FINLAND=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_FRANCE)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_FRANCE=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_FRANCE=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_GERMANY)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_GERMANY=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_GERMANY=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_HUNGARY)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_HUNGARY=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_HUNGARY=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_IRELAND)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_IRELAND=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_IRELAND=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_ITALY)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_ITALY=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_ITALY=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_JAPAN)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_JAPAN=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_JAPAN=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_NETHERLANDS)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_NETHERLANDS=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_NETHERLANDS=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_NEW_ZEALAND)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_NEW_ZEALAND=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_NEW_ZEALAND=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_POLAND)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_POLAND=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_POLAND=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_ROMANIA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_ROMANIA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_ROMANIA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_SLOVAKIA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_SLOVAKIA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_SLOVAKIA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_SLOVENIA)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_SLOVENIA=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_SLOVENIA=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_SPAIN)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_SPAIN=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_SPAIN=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_SWEDEN)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_SWEDEN=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_SWEDEN=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_NORWAY)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_NORWAY=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_NORWAY=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_SWITZERLAND)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_SWITZERLAND=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_SWITZERLAND=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_TR57)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_TR57=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_TR57=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_UK)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_UK=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_UK=1)
endif
ifeq ($(strip $(BRCM_VRG_COUNTRY_CFG_TAIWAN)),y)
LOCALEFLAGS += -DBRCM_VRG_COUNTRY_CFG_TAIWAN=1
LOCALEFLAGS_TYPE2 += $(addprefix -D , BRCM_VRG_COUNTRY_CFG_TAIWAN=1)
endif
else
# Using Static Configuration
LOCALEFLAGS = -DBRCM_VRG_COUNTRY_CFG_STATIC_PROFILE=1
LOCALEFLAGS_TYPE2 = $(addprefix -D , BRCM_VRG_COUNTRY_CFG_STATIC_PROFILE=1)
endif
###########################################
#
# Complete list of applications
#
###########################################
export OPENSOURCE_DIR=$(USERAPPS_DIR)/opensource
SUBDIRS_OPENSOURCE = $(OPENSOURCE_DIR)/atm2684/pvc2684ctl \
$(OPENSOURCE_DIR)/openssl \
$(OPENSOURCE_DIR)/ipsec-tools \
$(OPENSOURCE_DIR)/bridge-utils \
$(OPENSOURCE_DIR)/ppp/pppoe \
$(OPENSOURCE_DIR)/udhcp \
$(OPENSOURCE_DIR)/iptables \
$(OPENSOURCE_DIR)/ebtables \
$(OPENSOURCE_DIR)/reaim \
$(OPENSOURCE_DIR)/iproute2 \
$(OPENSOURCE_DIR)/libosip2 \
$(OPENSOURCE_DIR)/libusb \
$(OPENSOURCE_DIR)/siproxd \
$(OPENSOURCE_DIR)/zebra \
$(OPENSOURCE_DIR)/net-snmp \
$(OPENSOURCE_DIR)/ftpd \
$(OPENSOURCE_DIR)/libcreduction \
$(OPENSOURCE_DIR)/radvd \
$(OPENSOURCE_DIR)/dhcpv6 \
$(OPENSOURCE_DIR)/dproxy-nexgen \
$(OPENSOURCE_DIR)/busybox \
$(OPENSOURCE_DIR)/oprofile
#In future, we need to add soap when it
#is decoupled from cli
export BROADCOM_DIR=$(USERAPPS_DIR)/broadcom
SUBDIRS_BROADCOM = \
$(BROADCOM_DIR)/nvram \
$(BROADCOM_DIR)/cfm \
$(BROADCOM_DIR)/upnp/router/upnp \
$(BROADCOM_DIR)/nas \
$(BROADCOM_DIR)/wlctl \
$(BROADCOM_DIR)/vodsl \
$(BROADCOM_DIR)/atmctl \
$(BROADCOM_DIR)/adslctl \
$(BROADCOM_DIR)/netctl \
$(BROADCOM_DIR)/dnsprobe \
$(BROADCOM_DIR)/dynahelper \
$(BROADCOM_DIR)/dnsspoof \
$(BROADCOM_DIR)/igmp \
$(BROADCOM_DIR)/dhcpr \
$(BROADCOM_DIR)/sntp \
$(BROADCOM_DIR)/ippd \
$(BROADCOM_DIR)/ddnsd \
$(BROADCOM_DIR)/ethctl \
$(BROADCOM_DIR)/hotplug \
$(BROADCOM_DIR)/epittcp \
$(BROADCOM_DIR)/snmp \
$(BROADCOM_DIR)/tr69c \
$(BROADCOM_DIR)/tr64 \
$(BROADCOM_DIR)/ses \
$(BROADCOM_DIR)/relayCtl \
$(BROADCOM_DIR)/vdslctl \
$(BROADCOM_DIR)/hostCode \
$(BROADCOM_DIR)/bcmssl
SUBDIRS_APP = $(SUBDIRS_BROADCOM) $(SUBDIRS_OPENSOURCE)
SUBDIRS = $(foreach dir, $(SUBDIRS_APP), $(shell if [ -d "$(dir)" ]; then echo $(dir); fi))
OPENSOURCE_APPS = ipsec-tools pvc2684ctl pvc2684d brctl pppd udhcp iptables ebtables ip \
reaim tc libosip2 libusb siproxd snmp zebra bftpd radvd dhcpv6 busybox oprofile dproxy UrlFilter
BROADCOM_APPS = nvram bcmcrypto bcmshared bcmssl nas wlctl cfm upnp vodsl atmctl adslctl netctl dnsprobe dynahelper dnsspoof \
igmp dhcpr diagapp sntp ddnsd ilmi ippd hotplug ethctl epittcp snmp ses \
hmi2proxy relayctl vdslctl lld2d wsccmd
LIBC_OPTIMIZATION = libcreduction
ifneq ($(strip $(BUILD_GDBSERVER)),)
TOOLCHAIN_UTIL_APPS = gdbserver
endif
BUSYBOX_DIR = $(OPENSOURCE_DIR)/busybox
BRCMAPPS = openssl $(BROADCOM_APPS) $(OPENSOURCE_APPS) $(TOOLCHAIN_UTIL_APPS) $(LIBC_OPTIMIZATION)
bcm_fw: all
all: sanity_check profile_check create_install kernelbuild modbuild kernelbuildlite app hosttools buildimage
menuconfig:
@cd $(INC_KERNEL_BASE); \
if [ ! -e linux/CREDITS ]; then \
echo Untarring original Linux kernel source...; \
(tar xkfj $(ORIGINAL_KERNEL) 2> /dev/null || true); \
fi
$(MAKE) -C $(KERNEL_DIR)/scripts/lxdialog HOSTCC=gcc
$(CONFIG_SHELL) $(HOSTTOOLS_DIR)/scripts/Menuconfig $(TARGETS_DIR)/config.in
sanity_check:
@if [ "$(PROFILE)" = "" ]; then \
echo You need to specify build profile name from $(TARGETS_DIR) using 'make PROFILE=<profile name>...'; exit 1; \
fi
profile_check:
profile_check_xxx:
@if [ "$(LAST_PROFILE)" != "" ] && [ "$(LAST_PROFILE)" != "$(PROFILE)" ]; then \
echo "The specified profile, $(PROFILE), differs from the last one built, $(LAST_PROFILE)."; \
echo "The entire image must be rebuilt."; \
read -p "Press ENTER to rebuild the entire image or CTRL-C to abort. " ; \
$(MAKE) PROFILE=$(LAST_PROFILE) clean; \
$(MAKE) PROFILE=$(PROFILE); \
echo "Ignore the make exit error, Error 1"; \
exit 1; \
fi
create_install:
mkdir -p $(PROFILE_DIR)/fs.install
mkdir -p $(PROFILE_DIR)/fs.install/etc
$(KERNEL_DIR)/vmlinux:
# $(GENDEFCONFIG_CMD) $(PROFILE_PATH)
cd $(KERNEL_DIR); \
cp -f $(KERNEL_DIR)/arch/mips/defconfig $(KERNEL_DIR)/.config; \
$(MAKE) oldconfig; $(MAKE); $(MAKE) modules_install
kernelbuild:
@echo -e "\\e[36m -- kernelbuild start ---\\e[0m"
@echo
ifeq ($(wildcard $(KERNEL_DIR)/vmlinux),)
@cd $(INC_KERNEL_BASE); \
if [ ! -e linux/CREDITS ]; then \
echo Untarring original Linux kernel source...; \
(tar xkfj $(ORIGINAL_KERNEL) 2> /dev/null || true); \
fi
# $(GENDEFCONFIG_CMD) $(PROFILE_PATH)
cd $(KERNEL_DIR); \
cp -f $(KERNEL_DIR)/arch/mips/defconfig $(KERNEL_DIR)/.config; \
$(MAKE) oldconfig; $(MAKE)
else
cd $(KERNEL_DIR); $(MAKE)
endif
@echo -e "\\e[36m -- kernelbuild ok ---\\e[0m"
@echo
kernel: profile_check create_install kernelbuild hosttools buildimage
ifneq ($(strip $(BRCM_CHIP)),6348)
ifneq ($(strip $(BRCM_CHIP)),6338)
ifeq ($(strip $(BRCM_DRIVER_BCMDSP)),m)
kernelbuildlite:
@echo "******************** Kernel Build Lite ********************"; \
$(BRCMDRIVERS_DIR)/broadcom/char/dspapp/impl1/getDspModSizes.sh $(BRCMDRIVERS_DIR)/broadcom/char/dspapp/impl1/dspdd.ko $(SHARED_DIR) $(CROSS_COMPILE) $(KERNEL_DEBUG);
cd $(KERNEL_DIR); $(MAKE)
else
kernelbuildlite:
endif
else
kernelbuildlite:
endif
else
kernelbuildlite:
endif
ifeq ($(strip $(VOXXXLOAD)),1)
modbuild: touch_voice_files
cd $(KERNEL_DIR); $(MAKE) modules && $(MAKE) modules_install
else
modbuild:
cd $(KERNEL_DIR); $(MAKE) modules && $(MAKE) modules_install
endif
adslmodbuild:
cd $(KERNEL_DIR); $(MAKE) M=$(INC_ADSLDRV_PATH) modules
adslmodbuildclean:
cd $(KERNEL_DIR); $(MAKE) M=$(INC_ADSLDRV_PATH) clean
modules: profile_check create_install modbuild kernelbuildlite hosttools buildimage
adslmodule: adslmodbuild
adslmoduleclean: adslmodbuildclean
app: profile_check create_install prebuild $(BRCMAPPS) hosttools buildimage
prebuild:
mkdir -p $(INSTALL_DIR)/bin $(INSTALL_DIR)/lib
# touch_voice_files doesn't clean up voice, just enables incremental build of voice code
touch_voice_files:
# find bcmdrivers/broadcom/char/endpoint/ \( -name '*.o' -o -name '*.a' -o -name '*.lib' -o -name '*.ko' -o -name '*.cmd' -o -name '.*.cmd' -o -name '*.c' -o -name '*.mod' \) -print -exec rm -f "{}" ";"
rm -rf kernel/linux/.tmp_versions/endpointdd.mod
rm -rf kernel/linux/arch/mips/defconfig
rm -rf kernel/linux/include/config/bcm/endpoint/
rm -rf kernel/linux/include/asm-mips/offset.h
rm -rf kernel/linux/include/asm-mips/reg.h
# find kernel/linux/lib/ -name '*.o' -print -exec rm -f "{}" ";"
find kernel/linux/lib/ -name '*.lib' -print -exec rm -f "{}" ";"
# Build user applications depending on if they are
# specified in the profile
ifneq ($(strip $(BUILD_PVC2684CTL)),)
export BUILD_PVC2684D=$(BUILD_PVC2684CTL)
pvc2684d:
pvc2684ctl:
$(MAKE) -C $(OPENSOURCE_DIR)/atm2684/pvc2684ctl $(BUILD_PVC2684CTL)
else
pvc2684d:
pvc2684ctl:
endif
ifneq ($(strip $(BUILD_BRCTL)),)
brctl:
cd $(OPENSOURCE_DIR); (tar xkfj bridge-utils.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/bridge-utils $(BUILD_BRCTL)
else
brctl:
endif
ifneq ($(strip $(BUILD_VCONFIG)),)
export BUILD_VCONFIG=y
endif
ifneq ($(strip $(BUILD_SUPERDMZ)),)
export BUILD_SUPERDMZ=y
endif
ifneq ($(strip $(BUILD_CFM)),)
ifneq ($(strip $(BUILD_CFM_MENU)),)
export BUILD_CFM_MENU=y
endif
cfm:
$(MAKE) -C $(BROADCOM_DIR)/cfm $(BUILD_CFM)
else
cfm:
endif
# iptables is dependent on kernel netfilter modules
ifneq ($(strip $(BRCM_KERNEL_NETFILTER)),)
ifneq ($(strip $(BUILD_IPTABLES)),)
iptables:
cd $(OPENSOURCE_DIR); (tar xkfj iptables.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/iptables $(BUILD_IPTABLES)
iptables-build:
cd $(OPENSOURCE_DIR); (tar xkfj iptables.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/iptables static
else
iptables:
endif
else
iptables:
@echo Warning: You need to enable netfilter in the kernel !!!!!
endif
ifneq ($(strip $(BUILD_EBTABLES)),)
ebtables:
cd $(OPENSOURCE_DIR); (tar xkfj ebtables.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/ebtables $(BUILD_EBTABLES)
else
ebtables:
endif
ifneq ($(strip $(BUILD_PPPD)),)
pppd:
$(MAKE) -C $(OPENSOURCE_DIR)/ppp/pppoe $(BUILD_PPPD)
else
pppd:
endif
ifneq ($(strip $(BUILD_REAIM)),)
reaim:
cd $(OPENSOURCE_DIR); (tar xkfj reaim.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/reaim $(BUILD_REAIM)
else
reaim:
endif
ifneq ($(strip $(BRCM_KERNEL_NETQOS)),)
tc:
cd $(OPENSOURCE_DIR); (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else
tc:
endif
ifneq ($(strip $(BUILD_IPROUTE2)),)
ip:
cd $(OPENSOURCE_DIR); (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else
ip:
endif
ifneq ($(strip $(BUILD_GDBSERVER)),)
gdbserver:
install -m 755 $(TOOLCHAIN)/mips-linux-uclibc/target-apps/usr/bin/gdbserver $(INSTALL_DIR)/bin
$(STRIP) $(INSTALL_DIR)/bin/gdbserver
else
gdbserver:
endif
ifneq ($(strip $(BUILD_ETHWAN)),)
export BUILD_ETHWAN=y
endif
ifneq ($(strip $(BUILD_UDHCP)),)
udhcp:
$(MAKE) -C $(OPENSOURCE_DIR)/udhcp $(BUILD_UDHCP)
else
udhcp:
endif
# UPNP is dependent on iptables
ifneq ($(strip $(BUILD_IPTABLES)),)
ifneq ($(strip $(BUILD_UPNP)),)
upnp: iptables-build
$(MAKE) -C $(BROADCOM_DIR)/upnp/router/upnp $(BUILD_UPNP)
else
upnp:
endif
else
upnp:
@echo Warning: You need to build iptables first !!!!!
endif
ifneq ($(strip $(BUILD_IPSEC_TOOLS)),)
ipsec-tools:
cd $(OPENSOURCE_DIR); (tar xkfj ipsec-tools.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/ipsec-tools $(BUILD_IPSEC_TOOLS)
else
ipsec-tools:
endif
ifneq ($(strip $(BUILD_CERT)),)
openssl:
cd $(OPENSOURCE_DIR); (tar xkfj openssl.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/openssl dynamic
else
openssl:
endif
ifneq ($(strip $(BUILD_SIPROXD)),)
siproxd:
cd $(OPENSOURCE_DIR); (tar xkfj siproxd.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/siproxd $(BUILD_SIPROXD)
libosip2:
cd $(OPENSOURCE_DIR); (tar xkfj libosip2.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/libosip2
else
siproxd:
libosip2:
endif
ifneq ($(strip $(BUILD_SNMP)),)
ifneq ($(strip $(BUILD_SNMP_SET)),)
export SNMP_SET=1
else
export SNMP_SET=0
endif
ifneq ($(strip $(BUILD_SNMP_ADSL_MIB)),)
export SNMP_ADSL_MIB=1
else
export SNMP_ADSL_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_ATM_MIB)),)
export SNMP_ATM_MIB=1
else
export SNMP_ATM_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_AT_MIB)),)
export SNMP_AT_MIB=1
else
export SNMP_AT_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_SYSOR_MIB)),)
export SNMP_SYSOR_MIB=1
else
export SNMP_SYSOR_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_TCP_MIB)),)
export SNMP_TCP_MIB=1
else
export SNMP_TCP_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_UDP_MIB)),)
export SNMP_UDP_MIB=1
else
export SNMP_UDP_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_IP_MIB)),)
export SNMP_IP_MIB=1
else
export SNMP_IP_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_ICMP_MIB)),)
export SNMP_ICMP_MIB=1
else
export SNMP_ICMP_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_SNMP_MIB)),)
export SNMP_SNMP_MIB=1
else
export SNMP_SNMP_MIB=0
endif
ifneq ($(strip $(BUILD_SNMP_ATMFORUM_MIB)),)
export SNMP_ATMFORUM_MIB=1
else
export SNMP_ATMFORUM_MIB=0
endif
ifneq ($(strip $(BRCM_SNMP)),)
ifneq ($(strip $(BUILD_SNMP_CHINA_TELECOM_CPE_MIB)),)
export BUILD_SNMP_CHINA_TELECOM_CPE_MIB=y
endif
ifneq ($(strip $(BUILD_CT_1_39_OPEN)),)
export BUILD_CT_1_39_OPEN=y
endif
ifneq ($(strip $(BUILD_SNMP_CHINA_TELECOM_CPE_MIB_V2)),)
export BUILD_SNMP_CHINA_TELECOM_CPE_MIB_V2=y
endif
ifneq ($(strip $(BUILD_SNMP_BRCM_CPE_MIB)),)
export BUILD_SNMP_BRCM_CPE_MIB=y
endif
ifneq ($(strip $(BUILD_SNMP_UDP)),)
export BUILD_SNMP_UDP=y
endif
ifneq ($(strip $(BUILD_SNMP_EOC)),)
export BUILD_SNMP_EOC=y
endif
ifneq ($(strip $(BUILD_SNMP_AAL5)),)
export BUILD_SNMP_AAL5=y
endif
ifneq ($(strip $(BUILD_SNMP_AUTO)),)
export BUILD_SNMP_AUTO=y
endif
ifneq ($(strip $(BUILD_SNMP_DEBUG)),)
export BUILD_SNMP_DEBUG=y
endif
ifneq ($(strip $(BUILD_SNMP_TRANSPORT_DEBUG)),)
export BUILD_SNMP_TRANSPORT_DEBUG=y
endif
ifneq ($(strip $(BUILD_SNMP_LAYER_DEBUG)),)
export BUILD_SNMP_LAYER_DEBUG=y
endif
endif
snmp:
ifneq ($(strip $(BRCM_SNMP)),)
## $(MAKE) -C $(BROADCOM_DIR)/snmp $(BUILD_SNMP)
else
cd $(OPENSOURCE_DIR); (tar xkfj net-snmp.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/net-snmp $(BUILD_SNMP)
endif
else
snmp:
endif
ifeq ($(strip $(BUILD_SQUASH_HIGH)),y)
export BUILD_SQUASH_HIGH=y
endif
ifneq ($(strip $(BUILD_SQUASH_NORMAL)),)
export BUILD_SQUASH_NORMAL=y
endif
ifneq ($(strip $(BUILD_SQUASH_LOW)),)
export BUILD_SQUASH_LOW=y
endif
ifneq ($(strip $(BUILD_4_LEVEL_QOS)),)
export BUILD_4_LEVEL_QOS=y
endif
ifneq ($(strip $(BUILD_ILMI)),)
ilmi:
cd $(OPENSOURCE_DIR); (tar xkfj net-snmp.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(BROADCOM_DIR)/ilmi $(BUILD_ILMI)
else
ilmi:
endif
ifneq ($(strip $(BUILD_VODSL)),)
vodsl:
$(MAKE) -C $(BROADCOM_DIR)/vodsl $(BUILD_VODSL)
else
vodsl:
endif
# Leave it for the future when soap server is decoupled from cfm
ifneq ($(strip $(BUILD_SOAP)),)
ifeq ($(strip $(BUILD_SOAP_VER)),2)
soapserver:
$(MAKE) -C $(BROADCOM_DIR)/SoapToolkit/SoapServer $(BUILD_SOAP)
else
soap:
$(MAKE) -C $(BROADCOM_DIR)/soap $(BUILD_SOAP)
endif
else
soap:
endif
ifneq ($(strip $(BUILD_NAS)),)
export WIRELESS=1
nas:
if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/nas ]; then \
rm -rf $(BROADCOM_DIR)/nas/*; \
cp -pRdf $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/nas/* $(BROADCOM_DIR)/nas; \
fi
$(MAKE) -C $(BROADCOM_DIR)/nas $(BUILD_NAS)
#add hotplug here, for nas use only
hotplug:
$(MAKE) -C $(BROADCOM_DIR)/hotplug $(BUILD_NAS)
bcmcrypto:
if [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/bcmcrypto/Makefile ]; then \
$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/bcmcrypto dynamic; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.a ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.a $(INSTALL_DIR)/lib; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.so ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.so $(INSTALL_DIR)/lib; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.so_$(PROFILE)_save ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmcrypto.so_$(PROFILE)_save $(INSTALL_DIR)/lib/libwlbcmcrypto.so; \
fi
bcmshared:
if [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared/Makefile ] && [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared/UdpLib.c ]; then \
$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared dynamic; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.a ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.a $(INSTALL_DIR)/lib; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.so ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.so $(INSTALL_DIR)/lib; \
elif [ -f $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.so_$(PROFILE)_save ]; then \
install -m 755 $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/libwlbcmshared.so_$(PROFILE)_save $(INSTALL_DIR)/lib/libwlbcmshared.so; \
fi
else
export WIRELESS=0
nas:
#add hotplug here, for nas use only
hotplug:
bcmcrypto:
bcmshared:
endif
ifneq ($(strip $(BUILD_WLCTL)),)
export WIRELESS=1
export BUILD_WLCTL_SHLIB=1
wlctl:
if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/wlctl ]; then \
rm -rf $(BROADCOM_DIR)/wlctl/*; \
cp -pRdf $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/wlctl/* $(BROADCOM_DIR)/wlctl; \
fi
$(MAKE) -C $(BROADCOM_DIR)/wlctl $(BUILD_WLCTL)
else
export WIRELESS=0
wlctl:
endif
export BUILD_WL_SHLIB=1
#Set 1 to BUILD_WL_SHLIB to enable wl_shared library.
#Set 0 to BUILD_WL_SHLIB to use wl static library.
ifneq ($(strip $(BUILD_EPITTCP)),)
epittcp:
$(MAKE) -C $(BROADCOM_DIR)/epittcp $(BUILD_EPITTCP)
else
epittcp:
endif
ifneq ($(strip $(BUILD_SES)),)
ses:
if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/ses ]; then \
rm -rf $(BROADCOM_DIR)/ses/*; \
cp -pRdf $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/ses/* $(BROADCOM_DIR)/ses; \
fi
$(MAKE) -C $(BROADCOM_DIR)/ses $(BUILD_SES)
else
ses:
endif
ifneq ($(strip $(BUILD_NVRAM)),)
nvram:
$(MAKE) -C $(BROADCOM_DIR)/nvram $(BUILD_NVRAM)
else
nvram:
endif
#Always compile Ethernet control utility
ethctl:
$(MAKE) -C $(BROADCOM_DIR)/ethctl dynamic
ifneq ($(strip $(BUILD_DNSPROBE)),)
dnsprobe:
$(MAKE) -C $(BROADCOM_DIR)/dnsprobe $(BUILD_DNSPROBE)
else
dnsprobe:
endif
ifneq ($(strip $(BUILD_DYNAHELPER)),)
dynahelper:
$(MAKE) -C $(BROADCOM_DIR)/dynahelper $(BUILD_DYNAHELPER)
else
dynahelper:
endif
ifneq ($(strip $(BUILD_DNSSPOOF)),)
dnsspoof:
$(MAKE) -C $(BROADCOM_DIR)/dnsspoof $(BUILD_DNSSPOOF)
else
dnsspoof:
endif
ifneq ($(strip $(BUILD_DPROXY)),)
dproxy:
cd $(OPENSOURCE_DIR); (tar xkfj dproxy-nexgen.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/dproxy-nexgen $(BUILD_DPROXY)
else
dproxy:
endif
ifneq ($(strip $(BUILD_IGMP)),)
igmp:
$(MAKE) -C $(BROADCOM_DIR)/igmp $(BUILD_IGMP)
else
igmp:
endif
ifneq ($(strip $(BUILD_DHCPR)),)
dhcpr:
$(MAKE) -C $(BROADCOM_DIR)/dhcpr $(BUILD_DHCPR)
else
dhcpr:
endif
ifneq ($(strip $(BUILD_IPTABLES)),)
ifneq ($(strip $(BUILD_TOD)),)
UrlFilter:
$(MAKE) -C $(OPENSOURCE_DIR)/iptables/libipq
$(MAKE) -C $(OPENSOURCE_DIR)/urlfilter $(BUILD_TOD)
else
UrlFilter:
endif
else
UrlFilter:
@echo Warning: You need to enable iptables!!!!!
endif
ifneq ($(strip $(BUILD_ZEBRA)),)
zebra:
cd $(OPENSOURCE_DIR); (tar xkfj zebra.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/zebra $(BUILD_ZEBRA)
else
zebra:
endif
ifeq ($(strip $(BUILD_LIBUSB)),y)
libusb:
cd $(OPENSOURCE_DIR); (tar xkfj libusb.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/libusb
install -m 755 $(OPENSOURCE_DIR)/libusb/.libs/libusb-0.1.so.4 $(INSTALL_DIR)/lib
else
libusb:
endif
ifneq ($(strip $(BUILD_ATMCTL)),)
atmctl:
$(MAKE) -C $(BROADCOM_DIR)/atmctl $(BUILD_ATMCTL)
else
atmctl:
endif
ifneq ($(strip $(BUILD_ADSLCTL)),)
adslctl:
$(MAKE) -C $(BROADCOM_DIR)/adslctl $(BUILD_ADSLCTL)
else
adslctl:
endif
ifeq ($(strip $(BUILD_CFM_CLI)),y)
ifneq ($(strip $(BUILD_NETCTL)),)
netctl:
$(MAKE) -C $(BROADCOM_DIR)/netctl $(BUILD_NETCTL)
else
netctl:
endif
else
netctl:
endif
ifneq ($(strip $(BUILD_BUSYBOX)),)
busybox:
cd $(OPENSOURCE_DIR); (tar xkfj busybox.tar.bz2 2> /dev/null || true)
# $(MAKE) -C $(OPENSOURCE_DIR)/busybox $(BUILD_BUSYBOX)
cd $(OPENSOURCE_DIR)/busybox; cp -f $(BUSYBOX_CONFIG) .config
$(MAKE) -C $(OPENSOURCE_DIR)/busybox install
else
busybox:
endif
ifneq ($(strip $(BUILD_LIBCREDUCTION)),)
libcreduction:
$(MAKE) -C $(OPENSOURCE_DIR)/libcreduction install
else
libcreduction:
endif
ifneq ($(strip $(BUILD_DIAGAPP)),)
diagapp:
$(MAKE) -C $(BROADCOM_DIR)/diagapp $(BUILD_DIAGAPP)
else
diagapp:
endif
ifneq ($(strip $(BUILD_FTPD)),)
bftpd:
cd $(OPENSOURCE_DIR); (tar xkfj ftpd.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/ftpd $(BUILD_FTPD)
else
bftpd:
endif
ifneq ($(strip $(BUILD_DDNSD)),)
ddnsd:
$(MAKE) -C $(BROADCOM_DIR)/ddnsd $(BUILD_DDNSD)
else
ddnsd:
endif
ifneq ($(strip $(BUILD_SNTP)),)
sntp:
$(MAKE) -C $(BROADCOM_DIR)/sntp $(BUILD_SNTP)
else
sntp:
endif
ifneq ($(strip $(BUILD_IPPD)),)
ippd:
$(MAKE) -C $(BROADCOM_DIR)/ippd $(BUILD_IPPD)
else
ippd:
endif
ifneq ($(strip $(BUILD_LLTD)),)
lld2d:
if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/lltd ]; then \
rm -rf $(BROADCOM_DIR)/lltd/*; \
cp -rf $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/lltd/* $(BROADCOM_DIR)/lltd; \
fi
$(MAKE) -C $(BROADCOM_DIR)/lltd $(BUILD_LLTD)
else
lld2d:
endif
ifneq ($(strip $(BUILD_WSC)),)
export BUILD_WSC_CONFIG_UPNP_DISABLE=0
# BUILD_WSC_CONFIG_UPNP_DISABLE=1 to disable UPNP w/ AP config mode
# BUILD_WSC_CONFIG_UPNP_DISABLE=0 should be 0 for WiFi test
wsccmd:
if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/wsc ]; then \
rm -rf $(BROADCOM_DIR)/wsc/*; \
cp -rf $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/wsc/* $(BROADCOM_DIR)/wsc; \
fi
$(MAKE) -C $(BROADCOM_DIR)/wsc $(BUILD_WSC)
else
wsccmd:
endif
ifneq ($(strip $(BUILD_PORT_MIRRORING)),)
export BUILD_PORT_MIRRORING=1
else
export BUILD_PORT_MIRRORING=0
endif
ifeq ($(BRCM_USE_SUDO_IFNOT_ROOT),y)
BRCM_BUILD_USR=$(shell whoami)
BRCM_BUILD_USR1=$(shell sudo touch foo;ls -l foo | awk '{print $$3}';sudo rm -rf foo)
else
BRCM_BUILD_USR=root
endif
ifneq ($(strip $(BUILD_HOSTMGR)),)
hmi2proxy: vdsl_processing
$(MAKE) -C $(BROADCOM_DIR)/hostCode/hostMgr $(BUILD_HOSTMGR) PHY=memap6348 TARGET='"HOSTMGR"'
else
hmi2proxy:
endif
ifneq ($(strip $(BUILD_RELAYCONTROL)),)
relayctl: add_6510_support
$(MAKE) -C $(BROADCOM_DIR)/relayCtl/relay6348 $(BUILD_RELAYCONTROL) PHY=proxy TARGET='"RELAY"'
else
relayctl:
endif
ifneq ($(strip $(BUILD_VDSLCTL)),)
vdslctl: add_6510_support
$(MAKE) -C $(BROADCOM_DIR)/vdslctl/vdslctl $(BUILD_VDSLCTL) PHY=proxy TARGET='"VDSLCTL"'
else
vdslctl:
endif
ifneq ($(strip $(BUILD_TR69C_BCM_SSL)),)
bcmssl:
cd $(BROADCOM_DIR); (tar xkjf bcmssl.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(BROADCOM_DIR)/bcmssl
else
bcmssl:
endif
ifneq ($(strip $(BUILD_IPV6)),)
radvd:
cd $(OPENSOURCE_DIR); (tar xkjf radvd.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/radvd
else
radvd:
endif
ifneq ($(strip $(BUILD_IPV6)),)
dhcpv6:
cd $(OPENSOURCE_DIR); (tar xkjf dhcpv6.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/dhcpv6
else
dhcpv6:
endif
ifneq ($(strip $(BUILD_IPV6)),)
ip:
cd $(OPENSOURCE_DIR); (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else
ip:
endif
ifneq ($(strip $(BUILD_OPROFILE)),)
oprofile:
cd $(OPENSOURCE_DIR); (tar xkfj oprofile.tar.bz2 2> /dev/null || true)
$(MAKE) -C $(OPENSOURCE_DIR)/oprofile
else
oprofile:
endif
hosttools:
# $(MAKE) -C $(HOSTTOOLS_DIR)
vdsl_processing: prebuild add_6510_support vdsl_modem vdsl_modem_file
vdsl_modem_file:
@echo "************* VDSL Housekeeping **************************************"
@echo "VCOPE_BOARD=$(VCOPE_BOARD) HMI_VERSION=$(HMI_VERSION)"
@echo "VCOPE_TYPE=$(VCOPE_TYPE) VCOPE_LINE_NUMBER=$(VCOPE_LINE_NUMBER)"
@echo "**********************************************************************"
vdsl_modem:
- cmp -s $(INSTALL_DIR)/images/modem.bin $(6510_REF_CODE)/images/$(VMODEM_BIN); \
if [ ! $$? -eq 0 ]; then \
echo "VCOPE: different type - need clean up"; \
rm -f `find userapps/broadcom/hostCode/ -name *.[oa] -o -name *.depend`; \
rm -f `find userapps/broadcom/relayCtl/ -name *.[oa] -o -name *.depend`; \
rm -f `find userapps/broadcom/vdslctl/ -name *.[oa] -o -name *.depend`; \
mkdir -p $(INSTALL_DIR)/images; \
fi
@echo "$(INSTALL_DIR)/images/: Creating \"modem.bin\" out of $(VMODEM_BIN)"
cp -f $(6510_REF_CODE)/images/$(VMODEM_BIN) $(INSTALL_DIR)/images/modem.bin;
cp -f $(6510_REF_CODE)/images/$(VBOOT_BIN) $(INSTALL_DIR)/images/boot.bin;
export BRCM_IKOS
# IKOS Emulator build that does not include the CFE boot loader.
# Edit targets/ikos/ikos and change the chip and board id to desired values.
# Then build: make PROFILE=ikos ikos
ikos:
@echo -e '#define SOFTWARE_VERSION ""\n#define RELEASE_VERSION ""\n#define PSI_VERSION ""\n' > $(BROADCOM_CFM_DIR)/inc/version.h
@-mv -f $(FSSRC_DIR)/etc/profile $(FSSRC_DIR)/etc/profile.dontuse >& /dev/null
@if [ ! -a $(CFE_FILE) ] ; then echo "no cfe" > $(CFE_FILE); echo "no cfe" > $(CFE_FILE).del; fi
$(MAKE) PROFILE=$(PROFILE)
@mv -f $(FSSRC_DIR)/etc/profile.dontuse $(FSSRC_DIR)/etc/profile
@cd $(PROFILE_DIR); \
$(OBJCOPY) --output-target=srec vmlinux vmlinux.srec; \
xxd $(FS_KERNEL_IMAGE_NAME) | grep "^00000..:" | xxd -r > bcmtag.bin; \
$(OBJCOPY) --output-target=srec --input-target=binary --change-addresses=0xb8010000 bcmtag.bin bcmtag.srec; \
$(OBJCOPY) --output-target=srec --input-target=binary --change-addresses=0xb8010100 rootfs.img rootfs.srec; \
@rm bcmtag.bin; \
grep -v "^S7" vmlinux.srec > bcm9$(BRCM_CHIP)_$(PROFILE).srec; \
grep "^S3" bcmtag.srec >> bcm9$(BRCM_CHIP)_$(PROFILE).srec; \
grep -v "^S0" rootfs.srec >> bcm9$(BRCM_CHIP)_$(PROFILE).srec
@if [ ! -a $(CFE_FILE).del ] ; then rm -f $(CFE_FILE) $(CFE_FILE).del; fi
@echo -e "\nAn image without CFE for the IKOS emulator has been built. It is named"
@echo -e "targets/$(PROFILE)/bcm9$(BRCM_CHIP)_$(PROFILE).srec\n"
# IKOS Emulator build that includes the CFE boot loader.
# Both Linux and CFE boot loader toolchains need to be installed.
# Edit targets/ikos/ikos and change the chip and board id to desired values.
# Then build: make PROFILE=ikos ikoscfe
ikoscfe:
@echo -e '#define SOFTWARE_VERSION ""\n#define RELEASE_VERSION ""\n#define PSI_VERSION ""\n' > $(BROADCOM_CFM_DIR)/inc/version.h
@-mv -f $(FSSRC_DIR)/etc/profile $(FSSRC_DIR)/etc/profile.dontuse >& /dev/null
$(MAKE) PROFILE=$(PROFILE)
@mv -f $(FSSRC_DIR)/etc/profile.dontuse $(FSSRC_DIR)/etc/profile
$(MAKE) -C $(BL_BUILD_DIR) clean
$(MAKE) -C $(BL_BUILD_DIR)
$(MAKE) -C $(BL_BUILD_DIR) ikos_finish
cd $(PROFILE_DIR); \
echo -n "** no kernel **" > kernelfile; \
$(HOSTTOOLS_DIR)/bcmImageBuilder --output $(CFE_FS_KERNEL_IMAGE_NAME) --chip $(BRCM_CHIP) --board $(BRCM_BOARD_ID) --blocksize $(BRCM_FLASHBLK_SIZE) --cfefile $(BL_BUILD_DIR)/cfe$(BRCM_CHIP).bin --rootfsfile rootfs.img --kernelfile kernelfile --include-cfe; \
$(HOSTTOOLS_DIR)/createimg --boardid=$(BRCM_BOARD_ID) --numbermac=$(BRCM_NUM_MAC_ADDRESSES) --macaddr=$(BRCM_BASE_MAC_ADDRESS) --tp=$(BRCM_MAIN_TP_NUM) --psisize=$(BRCM_PSI_SIZE) --inputfile=$(CFE_FS_KERNEL_IMAGE_NAME) --outputfile=$(FLASH_IMAGE_NAME); \
$(HOSTTOOLS_DIR)/addvtoken $(FLASH_IMAGE_NAME) $(FLASH_IMAGE_NAME).w; \
$(OBJCOPY) --output-target=srec --input-target=binary --change-addresses=0xb8000000 $(FLASH_IMAGE_NAME).w $(FLASH_IMAGE_NAME).srec; \
$(OBJCOPY) --output-target=srec vmlinux vmlinux.srec; \
@rm kernelfile; \
grep -v "^S7" vmlinux.srec > bcm9$(BRCM_CHIP)_$(PROFILE).srec; \
grep "^S3" $(BL_BUILD_DIR)/cferam$(BRCM_CHIP).srec >> bcm9$(BRCM_CHIP)_$(PROFILE).srec; \
grep -v "^S0" $(FLASH_IMAGE_NAME).srec >> bcm9$(BRCM_CHIP)_$(PROFILE).srec; \
grep -v "^S7" vmlinux.srec > bcm9$(BRCM_CHIP)_$(PROFILE).utram.srec; \
grep -v "^S0" $(BL_BUILD_DIR)/cferam$(BRCM_CHIP).srec >> bcm9$(BRCM_CHIP)_$(PROFILE).utram.srec;
@echo -e "\nAn image with CFE for the IKOS emulator has been built. It is named"
@echo -e "targets/$(PROFILE)/bcm9$(BRCM_CHIP)_$(PROFILE).srec"
@echo -e "\nBefore testing with the IKOS emulator, this build can be unit tested"
@echo -e "with an existing chip and board as follows."
@echo -e "1. Flash targets/$(PROFILE)/$(FLASH_IMAGE_NAME).w onto an existing board."
@echo -e "2. Start the EPI EDB debugger. At the edbice prompt, enter:"
@echo -e " edbice> fr m targets/$(PROFILE)/bcm9$(BRCM_CHIP)_$(PROFILE).utram.srec"
@echo -e " edbice> r"
@echo -e "3. Program execution will start at 0xb8000000 (or 0xbfc00000) and,"
@echo -e " if successful, will enter the Linux shell.\n"
buildimage: $(KERNEL_DIR)/vmlinux
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),squashfs)
cd $(TARGETS_DIR); ./buildFS
else
ifeq ($(BRCM_BUILD_USR),root)
su --command="cd $(TARGETS_DIR); ./buildFS"
else
ifeq ($(BRCM_BUILD_USR1),root)
cd $(TARGETS_DIR); sudo ./buildFS
else
cd $(TARGETS_DIR); rm -rf $(PROFILE)/fs; ln -s /work/$(BRCM_BUILD_USR)/fs $(PROFILE)/fs; sudo ./buildFS
endif
endif
endif
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),squashfs)
#$(HOSTTOOLS_DIR)/mksquashfs $(TARGET_FS) $(PROFILE_DIR)/rootfs.img -noappend -be -always-use-fragments -gzip
$(HOSTTOOLS_DIR)/mksquashfs $(TARGET_FS) $(PROFILE_DIR)/rootfs.img -noappend -be $(FS_COMPRESSION) -no-fragments -noI -all-root -D $(HOSTTOOLS_DIR)/device_table.txt
else
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),cramfs)
# $(HOSTTOOLS_DIR)/mkcramfs -r -g $(TARGET_FS) $(PROFILE_DIR)/rootfs.img
$(HOSTTOOLS_DIR)/mkcramfs -r $(TARGET_FS) $(PROFILE_DIR)/rootfs.img
else
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),jffs2)
$(HOSTTOOLS_DIR)/mkfs.jffs2 -b -p -e $(BRCM_FLASHBLK_SIZE) -r $(TARGET_FS) -o $(PROFILE_DIR)/rootfs.img
endif
endif
endif
ifneq ($(strip $(BRCM_KERNEL_ROOTFS)),nfs)
cd $(PROFILE_DIR); \
cp $(KERNEL_DIR)/vmlinux . ; \
$(STRIP) --remove-section=.note --remove-section=.comment vmlinux; \
$(OBJCOPY) -O binary vmlinux vmlinux.bin; \
$(HOSTTOOLS_DIR)/cmplzma -k -2 vmlinux vmlinux.bin vmlinux.lz;\
$(HOSTTOOLS_DIR)/bcmImageBuilder --output $(FS_KERNEL_IMAGE_NAME) --chip $(BRCM_CHIP) --board $(BRCM_BOARD_ID) --blocksize $(BRCM_FLASHBLK_SIZE) --cfefile $(CFE_FILE) --rootfsfile rootfs.img --kernelfile vmlinux.lz; \
$(HOSTTOOLS_DIR)/bcmImageBuilder --output $(CFE_FS_KERNEL_IMAGE_NAME) --chip $(BRCM_CHIP) --board $(BRCM_BOARD_ID) --blocksize $(BRCM_FLASHBLK_SIZE) --cfefile $(CFE_FILE) --rootfsfile rootfs.img --kernelfile vmlinux.lz --include-cfe; \
$(HOSTTOOLS_DIR)/createimg --boardid=$(BRCM_BOARD_ID) --numbermac=$(BRCM_NUM_MAC_ADDRESSES) --macaddr=$(BRCM_BASE_MAC_ADDRESS) --tp=$(BRCM_MAIN_TP_NUM) --psisize=$(BRCM_PSI_SIZE) --inputfile=$(CFE_FS_KERNEL_IMAGE_NAME) --outputfile=$(FLASH_IMAGE_NAME); \
$(HOSTTOOLS_DIR)/addvtoken $(FLASH_IMAGE_NAME) $(FLASH_IMAGE_NAME).w
@mkdir -p $(IMAGES_DIR)
@cp $(PROFILE_DIR)/$(FS_KERNEL_IMAGE_NAME) $(IMAGES_DIR)/$(FS_KERNEL_IMAGE_NAME)_$(BRCM_RELEASETAG)-$(shell date '+%y%m%d_%H%M')
@echo
@echo -e "Done! Image $(PROFILE) has been built in $(IMAGES_DIR)."
else
cd $(PROFILE_DIR); \
cp $(KERNEL_DIR)/vmlinux . ; \
$(STRIP) --remove-section=.note --remove-section=.comment vmlinux
@echo
@echo -e "\t=== Following the below steps to start your NFS root file system on host ==="
@echo -e "Step 1: Copy $(PROFILE_DIR)/vmlinux to your TFTP server boot directory, such as /tftpboot"
@echo -e "Step 2: Add \"$(PROFILE_DIR)/fs *(rw,no_root_squash)\" to /etc/exports"
@echo -e "Step 3: Become root and restart your nfs server, such as \"service nfs restart\""
@echo -e "Step 4: Reboot your board and break into CFE bootloader, choose h on \"Run from flash/host\" and vmlinux on \"Default host run file name\""
endif
###########################################
#
# System code clean-up
#
###########################################
subdirs: $(patsubst %, _dir_%, $(SUBDIRS))
$(patsubst %, _dir_%, $(SUBDIRS)) :
$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)
bcm_clean: target_clean app_clean cfg_backup kernel_clean cfg_restore hosttools_clean remove_6510_support
#clean: cfg_backup kernel_clean cfg_restore hosttools_clean clean_bcm_links
clean: target_clean cfg_backup kernel_clean cfg_restore hosttools_clean remove_6510_support clean_bcm_links
rm -f .tmpconfig*
cfg_backup:
cp $(KERNEL_DIR)/.config .config
cfg_restore:
cp .config $(KERNEL_DIR)/.config
fssrc_clean:
@rm -fr $(FSSRC_DIR)/bin
@rm -fr $(FSSRC_DIR)/sbin
@rm -fr $(FSSRC_DIR)/lib
@rm -fr $(FSSRC_DIR)/upnp
@rm -fr $(FSSRC_DIR)/docs
@rm -fr $(FSSRC_DIR)/webs
@rm -fr $(FSSRC_DIR)/usr
@rm -fr $(FSSRC_DIR)/linuxrc
@rm -fr $(FSSRC_DIR)/images
@rm -fr $(FSSRC_DIR)/etc/wlan
@rm -fr $(FSSRC_DIR)/etc/certs
kernel_clean: sanity_check
@echo -e "\\e[36m -- kernel_clean ---\\e[0m"
#$(MAKE) -C $(KERNEL_DIR) mrproper
rm -f $(KERNEL_DIR)/arch/mips/defconfig
#rm -f $(HOSTTOOLS_DIR)/lzma/decompress/*.o
rm -rf $(XCHANGE_DIR)/dslx/lib/LinuxKernel
rm -rf $(XCHANGE_DIR)/dslx/obj/LinuxKernel
app_clean: sanity_check app_expand_before_clean fssrc_clean wsc_clean
@echo -e "\\e[36m -- app_clean ---\\e[0m"
$(MAKE) subdirs TGT=clean
@rm -rf $(XCHANGE_DIR)/dslx/lib/LinuxUser
@rm -rf $(XCHANGE_DIR)/dslx/obj/LinuxUser
wsc_clean:
@if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/bcmcrypto/Makefile ]; then \
$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/bcmcrypto clean; \
fi
@if [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared/Makefile ] && [ -e $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared/UdpLib.c ]; then \
$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom/net/wl/bcm9$(BRCM_CHIP)/shared clean; \
fi
@if [ -e $(BROADCOM_DIR)/lltd/src/common.mk ]; then \
$(MAKE) -C $(BROADCOM_DIR)/lltd clean; \
fi
@if [ -e $(BROADCOM_DIR)/wsc/Wsccmd/src/linux/common.mk ]; then \
$(MAKE) -C $(BROADCOM_DIR)/wsc/Wsccmd/src/linux clean; \
fi
app_expand_before_clean:
# these archives need to be expended before cleaning - put makefile structures there there for cleaning
# OProfile
(tar xkfj $(OPENSOURCE_DIR)/oprofile.tar.bz2 -C $(OPENSOURCE_DIR) 2> /dev/null || true)
target_clean: sanity_check
@echo -e "\\e[36m -- target_clean ---\\e[0m"
@rm -f $(PROFILE_DIR)/rootfs.img
@rm -f $(PROFILE_DIR)/vmlinux
@rm -f $(PROFILE_DIR)/vmlinux.bin
@rm -f $(PROFILE_DIR)/vmlinux.lz
@rm -f $(PROFILE_DIR)/$(FS_KERNEL_IMAGE_NAME)
@rm -f $(PROFILE_DIR)/$(CFE_FS_KERNEL_IMAGE_NAME)
@rm -f $(PROFILE_DIR)/$(FLASH_IMAGE_NAME)
@rm -f $(PROFILE_DIR)/$(FLASH_IMAGE_NAME).w
@rm -f $(PROFILE_DIR)/*.srec
@rm -fr $(PROFILE_DIR)/modules
@rm -fr $(PROFILE_DIR)/op
@rm -fr $(INSTALL_DIR)
@find targets -name vmlinux -print -exec rm -f "{}" ";"
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),squashfs)
@rm -fr $(TARGET_FS)
else
ifeq ($(BRCM_BUILD_USR),root)
su --command="rm -fr $(TARGET_FS)"
else
sudo rm -fr $(TARGET_FS)/*; rm -rf $(TARGET_FS)
endif
endif
hosttools_clean:
@echo -e "\\e[36m -- hosttool_clean ---\\e[0m"
## $(MAKE) -C $(HOSTTOOLS_DIR) clean
add_6510_support:
$(6510_REF_CODE)/add6510support DYMMY_HMI_VERSON $(6510_REF_CODE)
remove_6510_support:
@echo -e "\\e[36m -- remove_6510_support ---\\e[0m"
@rm -fr $(BROADCOM_DIR)/hostCode
@rm -fr $(BROADCOM_DIR)/relayCtl
@rm -fr $(BROADCOM_DIR)/vdslctl
###########################################
#
# System-wide exported variables
# (in alphabetical order)
#
###########################################
export \
AR \
AS \
BRCM_APP_PHONE \
BRCMAPPS \
BRCM_BOARD \
BRCM_DRIVER_PCI \
BRCMDRIVERS_DIR \
BRCM_DSP_APM_FXO \
BRCM_DSP_APM_FXO_EXT \
BRCM_DSP_CODEC_G711 \
BRCM_DSP_CODEC_G723 \
BRCM_DSP_CODEC_G726 \
BRCM_DSP_CODEC_G729 \
BRCM_DSP_CODEC_G7xx \
BRCM_DSP_CODEC_T38_EXT \
BRCM_DSP_CODEC_T38_INT \
BRCM_DSP_HAL \
BRCM_DSP_HAL_EXTENSION \
BRCM_DSP_PCM \
BRCM_DSP_PCM_G726 \
BRCM_DSP_PCM_T38_EXT \
BRCM_EXTRAVERSION \
BRCM_KERNEL_NETQOS \
BRCM_KERNEL_ROOTFS \
BRCM_KERNEL_OPROFILE \
BRCM_LDX_APP \
BRCM_MIPS_ONLY_BUILD \
BRCM_MIPS_ONLY_BUILD \
BRCM_PSI_VERSION \
BRCM_PTHREADS \
BRCM_RELEASE \
BRCM_RELEASETAG \
BRCM_SNMP \
BRCM_UCLIBC \
BRCM_VERSION \
BRCM_VODSL_DUAL_3341 \
BRCM_VODSL_SRTP \
BRCM_VOICE_COUNTRY_JAPAN \
BRCM_VOICE_GLOBAL_CFLAGS \
BRCM_VOIP_TO_FXO \
BROADCOM_CFM_DIR \
BUILD_ADSLCTL \
BUILD_ATMCTL \
BUILD_BR2684CTL \
BUILD_BRCM_VLAN \
BUILD_BRCTL \
BUILD_BUSYBOX \
BUILD_CERT \
BUILD_CFM \
BUILD_CFM_CLI \
BUILD_CFM_SSHD \
BUILD_CFM_TELNETD \
BUILD_DDNSD \
BUILD_DHCPR \
BUILD_DIAGAPP \
BUILD_DIR \
BUILD_DNSPROBE \
BUILD_DPROXY \
BUILD_DYNAHELPER \
BUILD_DNSSPOOF \
BUILD_EBTABLES \
BUILD_EPITTCP \
BUILD_ETHWAN \
BUILD_FTPD \
BUILD_FTPD_STORAGE \
BUILD_GDBSERVER \
BUILD_IGMP \
BUILD_IPPD \
BUILD_IPROUTE2 \
BUILD_IPSEC_TOOLS \
BUILD_IPTABLES \
BUILD_WPS_BTN \
BUILD_LLTD \
BUILD_WSC \
BUILD_BCMCRYPTO \
BUILD_BCMSHARED \
BUILD_NAS \
BUILD_NETCTL \
BUILD_NVRAM \
BUILD_OPROFILE \
BUILD_PORT_MIRRORING \
BUILD_PPPD \
BUILD_PVC2684CTL \
BUILD_REAIM \
BUILD_RT2684D \
BUILD_SES \
BUILD_SIPROXD \
BUILD_SLACTEST \
BUILD_SNMP \
BUILD_SNTP \
BUILD_SOAP \
BUILD_SOAP_VER \
BUILD_SSHD_MIPS_GENKEY \
BUILD_TOD \
BUILD_TR64 \
BUILD_TR64_DEVICECONFIG \
BUILD_TR64_DEVICEINFO \
BUILD_TR64_LANCONFIGSECURITY \
BUILD_TR64_LANETHINTERFACECONFIG \
BUILD_TR64_LANHOSTS \
BUILD_TR64_LANHOSTCONFIGMGMT \
BUILD_TR64_LANUSBINTERFACECONFIG \
BUILD_TR64_LAYER3 \
BUILD_TR64_MANAGEMENTSERVER \
BUILD_TR64_TIME \
BUILD_TR64_USERINTERFACE \
BUILD_TR64_QUEUEMANAGEMENT \
BUILD_TR64_LAYER2BRIDGE \
BUILD_TR64_WANCABLELINKCONFIG \
BUILD_TR64_WANCOMMONINTERFACE \
BUILD_TR64_WANDSLINTERFACE \
BUILD_TR64_WANDSLLINKCONFIG \
BUILD_TR64_WANDSLCONNECTIONMGMT \
BUILD_TR64_WANDSLDIAGNOSTICS \
BUILD_TR64_WANETHERNETCONFIG \
BUILD_TR64_WANETHERNETLINKCONFIG \
BUILD_TR64_WANIPCONNECTION \
BUILD_TR64_WANPOTSLINKCONFIG \
BUILD_TR64_WANPPPCONNECTION \
BUILD_TR64_WLANCONFIG \
BUILD_TR69C \
BUILD_TR69_QUEUED_TRANSFERS \
BUILD_TR69C_SSL \
BUILD_TR69_XBRCM \
BUILD_TR69_UPLOAD \
BUILD_UDHCP \
BUILD_UPNP \
BUILD_VCONFIG \
BUILD_SUPERDMZ \
BUILD_VODSL \
BUILD_SIP_TLS \
BUILD_WLCTL \
BUILD_ZEBRA \
BUILD_LIBUSB \
BUILD_WANVLANMUX \
BUSYBOX_DIR \
CC \
CROSS_COMPILE \
CXX \
DEFAULTCFG_DIR \
FSSRC_DIR \
HOSTTOOLS_DIR \
INC_ATMBONDING_ETH_DRV_PATH \
INC_ATMBONDING_DRV_PATH \
INC_ATMAPI_DRV_PATH \
INC_ADSLDRV_PATH \
INC_BRCMBOARDPARMS_PATH \
INC_BRCMCFM_PATH \
INC_BRCMDRIVER_PRIV_PATH \
INC_BRCMDRIVER_PUB_PATH \
INC_BRCMSHARED_PRIV_PATH \
INC_BRCMSHARED_PUB_PATH \
INC_FLASH_PATH \
INC_ENDPOINT_PATH \
INC_KERNEL_BASE \
INSTALL_DIR \
JTAG_KERNEL_DEBUG \
KERNEL_DIR \
LD \
LIBCDIR \
LIBDIR \
LIB_PATH \
LINUXDIR \
LOCALEFLAGS \
LOCALEFLAGS_TYPE2 \
NM \
OBJCOPY \
OBJDUMP \
PROFILE_DIR \
RANLIB \
RUN_NOISE \
SSTRIP \
STRIP \
TARGETS_DIR \
TOOLCHAIN \
USERAPPS_DIR \
WEB_POPUP \
HTTPS_SUPPORT \
XCHANGE_DIR \
XCHANGE_DSP_APP_EXTENSION \
VCOPE_TYPE \
VCOPE_BOARD \
VCOPE_LINE_NUMBER \
BRCM_DRIVER_ATM_BONDING_DEFINES \
BCM_VDSL_TYPE_DEFINES \
BUILD_VIRT_SRVR \
BUILD_PORT_TRIG \
BUILD_TR69C_BCM_SSL \
BUILD_IPV6 \
BUILD_MULTISUBNET \
LINUX_KERNEL_USBMASS
